Blog

What is the installation method of household Small Power Distribution Unit (SPDU)?

Publish Time: Author: Site Editor Visit: 334

The household Small Power Distribution Unit (SPDU) is an important part of the household circuit and is responsible for distributing electrical energy to various electrical equipment, so it is very important to install the household Small Power Distribution Unit (SPDU) correctly. The following is the installation method of the household Small Power Distribution Unit (SPDU):

Choose a suitable installation location: When installing a household Small Power Distribution Unit (SPDU), you need to choose a suitable installation location, usually a well-ventilated, dry place that avoids direct sunlight.

Install the bracket: Install the Small Power Distribution Unit (SPDU) bracket on the installation position of the household Small Power Distribution Unit (SPDU). The bracket needs to be firm and stable to bear the weight of the Small Power Distribution Unit (SPDU).

Install the cables: run the cables through the wall through the conduit and connect to the input of the household Small Power Distribution Unit (SPDU).

Connect the circuit: To connect the circuit in the household Small Power Distribution Unit (SPDU), it needs to be connected correctly according to the circuit diagram and electrical specifications.

Install MCBs and switches: Install electrical components such as MCBs and switches in the household Small Power Distribution Unit (SPDU) to ensure the safety of the circuit.

Install the electric meter: Connect the electric meter to the output terminal of the household Small Power Distribution Unit (SPDU) to ensure the measurement and recording of electric energy.

Conduct electrical testing: After installation is complete, electrical testing is required to ensure the safety and proper operation of the circuit.

In short, the installation of household Small Power Distribution Unit (SPDU)es needs to be carried out in accordance with the specifications. Reasonable selection of installation locations, installation brackets, connecting cables, connecting circuits, installing electrical components, installing ammeters, and conducting electrical tests and other steps ensure the safety and normal operation of household circuits.

 

Next How to realize leakage protection in the process of using the split meter ready board?