Blog

Cheap Pole Top Box "I'm just cheap, but my quality is not discounted"

Publish Time: Author: Site Editor Visit: 396

Installation requirements of power Pole Top Box

The cheap Pole Top Box shall be made of non combustible materials; Open distribution boards can be installed in production places and offices with low risk of electric shock; Closed cabinets shall be installed in processing workshops, casting, forging, heat treatment, boiler room, carpentry room and other places with high risk of electric shock or poor working environment; In hazardous workplaces with conductive dust or flammable and explosive gases, closed or explosion-proof electrical facilities must be installed; All electrical components, instruments, switches and circuits of the distribution board (box) shall be arranged in order, firmly installed and easy to operate.

The bottom surface of the floor mounted plate (box) shall be 5 ~ 10 mm higher than the ground; The height of the center of the operating handle is generally 1.2 ~ 1.5m; There is no obstacle within 0.8 ~ 1.2m in front of the plate (box); The protection line is reliably connected; No bare electrified body shall be exposed outside the board (box); The electrical components that must be installed on the outer surface of the board (box) or on the distribution board must have reliable screen protection.

Next Street Light Pole Top Box "specialty is our goal"