Blog

Installation requirements for distribution boxes

Publish Time: Author: Site Editor Visit: 629

Distribution boxes shall be made of non-combustible materials; open distribution boards may be installed in production places and offices with low electric shock risk; enclosed cabinets shall be installed in processing workshops, foundries, forging, heat treatment, boiler rooms, woodworking houses and other places with high electric shock risk or poor working environment; and enclosed cabinets shall be installed in hazardous working places where conductive dust or flammable and explosive gases are produced. Installation of closed or explosion-proof electrical facilities; distribution box electrical components, meters, switches and lines should be arranged neatly, firmly installed, easy to operate. The bottom of the board (box) installed on the ground should be 5-10 mm higher than the ground; the center height of the operating handle is generally 1.2-1.5 m; there are no obstacles in the range of 0.8-1.2 m in front of the box; the protective wires are reliable; bare charged bodies are not exposed outside the box; the electrical components installed on the outside surface of the box or on the distribution board must have reliable screen protection.

Next Mechanical Life and Electrical Life of Contactors
Greaseproof Paper Bags Meter Seals Meter Seal Wireless Earbuds Sanitary Valve Hygienic 3 PCS Ball Valve Aerial Cable Powerfitting Paper Bag Machine Paper Bag Machine Ball Valve Security Seal Braided Copper Wires and Braided Copper Connectors BALL VALVE Sanitary Pump Optical Frame Sanitary Valves 卫生泵 卫生泵 Anti Corrosion Pipe Supports Paper Straw Making Machine