Neutral Block
The function of the neutral block is to connect the neutral line, so that the circuit forms a loop to ensure the normal operation of the electrical appliances. Generally speaking, the neutral block is ...
The function of the neutral block is to connect the neutral line, so that the circuit forms a loop to ensure the normal operation of the electrical appliances. Generally speaking, the neutral block is ...
Whether the neutral line of each circuit in the distribution box needs to be connected to the neutralblock does not depend on the neutral block, but depends on the type of switch in the distribution b ...
The earth bar is used to connect the earth wire. The function of earth bar is to form earthing and finally form protection. That is to say, if there is leakage of some electrical appliances in the cir ...
Because in the consciousness of many friends, whether it is the zero line or the ground line, they are connected to neutral block and ground bar. Then the neutral block and ground bars are ultimately ...
Whether the neutral line of each circuit in the distribution box needs to be connected to the neutral block does not depend on the neutral block, but depends on the type of switch in the distribution ...
For users, it can save electricity expenses. Users can make full use of the difference between peak and valley electricity prices to customize their own electricity consumption scheme, so as to use th ...
The manufacturer of distribution box puts forward some matters that must be paid attention to when removing the protective wire: the protective wire of distribution box (board) is not in place, and th ...
As an important part of distribution equipment, the distribution box produced by distribution box manufacturers is also very important for its transformation. In order to adapt to and facilitate the s ...
Due to the long time interval between the embedding of the box and the installation and wiring of the box panel, the box shall be disassembled with the box cover (door) and the panel first, and marked ...
1. When the fire power load of the building is level I and the AC power supply is used, the main power supply and emergency power supply should provide dual power supply, and the tree dry or radial po ...