Blog

Introduction to Plastic Meter Box or ready board

Publish Time: Author: Site Editor Visit: 368

The electricity Meter Box or ready board is a kind of power distribution device that can be directly fixed on the wall or installed on the pole, and can be installed with electronic meters and mechanical meters of any specifications, leakage protectors, junction boxes, leakage switches DZ47 or RCL fuses, and disconnectors. The knife switch ammeter and the switch are separated separately, and the user can control the switch. The line is not exposed with the function of electricity theft prevention.

 

The Meter Box or ready board includes single-phase Meter Box or ready board and three-phase Meter Box or ready board, which are suitable for AC 50HZ or 60HZ, and the rated working voltage is 200V or 380V.

 

Installation and use of the Meter Box or ready board: Please carefully check the integrity of all parts of the Meter Box or ready board during installation. The Meter Box or ready board shall be installed vertically at an angle of inclination. The degree shall not exceed 5 °.

 

The installation position of the plastic Meter Box or ready board shall be selected where there is no violent vibration, impact or enough corrosion to electrical components. As the materials used for the lock of the Meter Box or ready board are not resistant to strong alkalis, oxidizing acids and amines, ketones, oxidizing agents and aromatic deep agents, it is necessary to avoid contact with or use with these chemicals.

 

During the use of the Meter Box or ready board, sharp objects and hard objects shall be prevented from scratching the surface of the Meter Box or ready board. During the installation of the Meter Box or ready board, a cool and dry place shall be selected as far as possible to avoid direct sunlight for a long time, so as to extend the service life of the meter.

Next Analysis of the material of the meter box or ready board