In places where residential buildings are concentrated, the installation location of meter box and small power distribution units must be more standardized.

The installation location of meter box and small power distribution units in residential areas needs to be strictly regulated to ensure the safety and ease of use of the power system. Here are some important specification points:

Easily accessible: The meter box and small power distribution unit should be installed in an easily accessible location within a house or apartment building, such as an entrance hall or hallway. This makes it easier for the power supply company staff to read the meter and perform maintenance, and it also makes it easier for the owner to check the meter reading.

Moisture-proof and waterproof: The installation location should avoid exposure to humid or watery areas to prevent the meter box and small power distribution unit from getting damp or being damaged by water. Usually, the meter box and small power distribution unit will be installed on the wall and necessary sealing measures will be taken.

Ventilation and Space: The installation location should provide adequate ventilation and working space to prevent the meter from overheating or damage from lack of air circulation.

Safety distance: The meter box and small power distribution unit should be kept away from flammable materials and flammable gases to ensure safety. Generally, safety distance regulations are followed.

Visibility: The installation location should ensure that the meter reading is visible to residents so that they can monitor electricity usage.

Compliance: The installation location must comply with local electrical safety codes and building codes to ensure compliance and safety.

Maintenance: Regularly inspect and maintain the meter box and small power distribution unit to ensure its normal operation and safety.

In short, the standardized installation location of meter box and small power distribution units in concentrated residential areas is the key to ensuring the normal operation and safety of the power supply system. Installation should be carried out under the guidance of professionals and in compliance with relevant regulations and standards.